Page 12 - Automated Cutting Solutions

POWER SOURCES

Hypertherm® Plasma Arc Power Sources

Powermax® Systems

?? Spend less time on secondary operations with good cut quality and little dross
?? Consumable end of life detection avoids damage to the torch and to the work piece
?? Advanced electronics and PowercoolTM technology enable high duty cycles
?? Keep cutting longer

Cutting Specifications

System Output Pierce with Duty cycle at full output
current automatic THC*

Powermax 45 20-45 A 13 mm (1/2") 50%, 230-600V, 1-/3-PH / 40%, 200-208 V, 1-/3-PH

Powermax 65 20-65 A 16 mm (5/8") 50%, 230-600V, 1-/3-PH / 40%, 200-208 V, 1-/3-PH

Powermax 85 25-85 A 19 mm (3/4") 60%, 230-600V, 3-PH / 50%, 240 V, 1-PH / 40%, 200-208 V, 1-PH

Powermax 105 30-105 A 22 mm (7/8") 80%, 480-600V, 3-PH / 70%, 240 V, 3-PH
54%, 208 V, 3-PH / 50%, 200 V, 3-PH

Powermax 125 30-125 A 25 mm (1") 100%, 480/600 V, 3-PH

* Pierce capacity depends on the equipment being used. For Powermax systems, the higher capacity can be achieved when using an automatic torch
height control to set independent pierce heights and cutting heights for the torch.

HySpeed® HSD130 MaxPro200®

HySpeed Plasma HSD130 is an easy-to-use oxygen Engineered to deliver heavy-duty, high capacity
plasma system that is more productive and more mechanized and handheld cutting and gouging
cost-effective than other metal cutting solutions such across a wide range of industrial applications.
as oxyfuel, air plasma, and non-Long Life oxygen
plasma systems. Operating Data

Operating Data Mild steel cut capacity
Mild steel cut capacity
Dross free* (O2/Air): Dross free* (O2/Air): 20 mm (3/4")
Production pierce:
Severance: 16 mm (5/8") Production pierce: 32 mm (1-1/4")
Stainless steel cut capacity 25 mm (1")
Production pierce: 38 mm (1-1/2") Severance: 75 mm (3”)
Severance:
Aluminum cut capacity 20 mm (3/4") Stainless steel cut capacity
Production pierce: 25 mm (1")
Maximum cutting capacity: Production pierce: 25 mm (1")
20 mm (3/4")
25 mm (1") Severance: 64 mm (2-1/2")

Aluminum cut capacity

Production pierce: 32 mm (1-1/4")

Maximum cutting capacity: 75 mm (3")

* Feature and material type can influence dross free performance

12 automation_support@praxair.com

www.theTIMEtoAUTOMATE.com