Page 22 - Stainless Steel Solutions

FINISHING

Cup & wheel brushes

Wire Cup Brushes
Designed for high performance brushing of large
flat surfaces with blue colour coded hubs for easy
identification for stainless steel. Made from 304
stainless steel wire to help prevent contamination
and surface rusting of brushed stainless steel parts.

Type Part # Dia. Arbour Max RPM Wire
WAL13D312 3" (7.6 cm) M14 x 2.0 12,000 .0118" (.3 mm)
Crimped - cleans and prepares flat surfaces WAL13D314 3" (7.6 cm) 5/8"-11 12,000 .0118" (.3 mm)
and edges, light and medium-duty cleaning
WAL13E514 5" (12.7 cm) 5/8"-11 8,600 .020" (.5 mm)
WAL13F310 3" (7.6 cm) M10 X 1.25 12,000 .015" (.4 mm)
Knot-twisted - removes scale, deburring, WAL13F312 3" (7.6 cm) M14 X 2.0 12,000 .015" (.4 mm)
cleans welds and flat surfaces
WAL13F314 3" (7.6 cm) 5/8"-11 12,000 .015" (.4 mm)
Knot-twisted with ring - removes scale, WAL13G312 3" (7.6 cm) M14 x 2.0 12,000 .020" (.5 mm)
deburring, cleans welds and flat surfaces. WAL13G314 3" (7.6 cm) 5/8"-11 12,000 .020" (.5 mm)
Safety supporting ring controls flaring to
extend brush life WAL13G514 5" (12.7 cm) 5/8"-11 8,600 .020" (.5 mm)

Wire Wheel Brushes
FINISHING quality wire that is perfectly knotted and balanced for minimal
These brushes for use on stainless steel are made from top

vibration and maximum user safety.

Part #
Wire
Width
Dia.
Type
WAL13K464 4-1/2" (11 cm) 3/16" (4.8 mm) Arbour Max. RPM .020" (.5 mm)
15,000
5/8"-11
Stringer bead - bead
scale removal WAL13K514 5" (12.7 cm) 1/4" (6.4 mm) 5/8"-11 15,000 .020" (.5 mm)
WAL13K614 6" (15 cm) 1/4" (6.4 mm) 5/8"-11 10,000 .020" (.5 mm)
Knot-twisted - removal of WAL13L414 4" (10 cm) 3/8" (9.5 mm) 5/8"-11 20,000 .020" (.5 mm)
paint slag, scale, rust, surface
contamination, weld cleaning, WAL13L464 4-1/2" (11 cm) 3/8" (9.5 mm) 5/8"-11 15,000 .020" (.5 mm)
blending, finishing, deburring
and general cleaning WAL13L514 5" (12.7 cm) 3/8" (9.5 mm) 5/8"-11 15,000 .020" (.5 mm)

Saucer-Cup Brushes
Have a built-in working angle of 45º to clean surfaces in hard-to-reach
areas such as inside corners, edges and contours on stainless steel.

Type Part # Dia. Arbour Max RPM Wire
WAL13H414 4" (10 cm) 5/8"-11 20,000 .015" (.4 mm)
Knot-twisted - removal of paint slag, scale,
rust, surface contamination, weld cleaning, WAL13H514 5" (12.7 cm) 5/8"-11 15,000 .020" (.5 mm)
blending, finishing, deburring and general WAL13H614 6" (15 cm) 5/8"-11 12,500 .020" (.5 mm)
cleaning
WAL13H714 7" (17.8 cm) 5/8"-11 10,000 .020" (.5 mm)

19

praxair.ca/stores praxair.ca/stainless