Page 405 - Praxair - Specialty Gases and Equipment Reference Guide

Gas Detection Systems

One to Six Gas Portable Monitor

Specifications
n Enclosure n Language n Operating Temperature and Humidity
Weatherproof, chemical resistant, RFI/EMI Readout can display in 5 languages (English, -20 °C to 50 °C (-4 °F to 122 °F),
coated high impact polycarbonate-PBT French, German, Italian, or Spanish) 0 to 95% RH, non-condensing
blend. Can operate in 2" of water without n Environmental
leakage. Ergonomically balanced with n Alarms IP-64
2 Alarms per channel plus TWA and STEL
rugged top mounted handle. Water and alarms for toxics. The two alarms are fully
dust resistant equivalent to IP64 adjustable for levels, latching or self reset, n Response Time
n Dimensions and silenceable 30 Seconds to 90% (for most gases) using
standard 5 ft hose
9.5" L x 5.25" W x 5.875" H n Alarm Method
n Weight Buzzer 95 dB at 30 cm, four high intensity n Safety Rating
Intrinsically Safe, Class I, Groups A, B, C, D.
3.8 lbs (standard 4 gas with batteries) LED’s Approvals: CSA / CE
n Detection Principle n Controls n Standard Accessories
Catalytic combustion, electrochemical cell, 4 External glove friendly push buttons Shoulder strap, alkaline batteries, hydro-
galvanic cell, infrared, photoionization for operation, demand zero, and auto- phobic probe, and 5 foot hose, internal
detector, and thermal conductivity calibration. Buttons also access LEL/ppm, hydrophobic filter
n Sampling Method alarm silence, peak hold, TWA/STEL values,
Powerful, long-life internal pump (over 6,000 battery status, conversion factors, and many n Optional Accessories
n Dilution fitting (50/50)
hours) can draw samples over 125 feet. other features n NiMH batteries
Flow rate approximately 2.0 SCFH n Continuous Operation n Battery charger, 115 VAC, 220 VAC,
At 70 °F, 18 hours using alkaline batteries,
n Display or 12 VDC (charge time 4 hours)
3 display modes: display all gases, large or 20 hours using NiMH n Continuous operation adapter,
font-autoscroll, or large font-manual scroll. n Power Source 115 VAC or 12 VDC
Polyurethane protected overlay. Backlight, 4 alkaline or NiMH, size C batteries n Extension hoses
illuminates for alarms and by demand, with (Charger has alkaline recognition to prevent
adjustable time battery damage if charging is attempted n Warranty
Two year material and workmanship, one year
with alkalines) for PID sensor.

Gases and Detectable Ranges
Gas Measuring Range Accuracy Gas Measuring Range Accuracy
Standard Confined Space Gases IR Sensors
Hydrocarbons 0 - 100% LEL ± 5% of reading or Carbon Dioxide 0 - 10,000 ppm ± 5% of reading or
(CH 4 , standard) ± 2% LEL* (CO 2 ) 0 - 5% volume ± 2% of full scale*
0 - 5% volume ± 5% of reading or 0 - 60% volume
(CH 4 ) ± 2% LEL* Methane 0 - 100% LEL/ ± 5% of reading or
0 - 50,000 ppm ± 25 ppm or (CH 4 ) 0 - 100% volume ± 2% of full scale*
± 5% of reading* Hydrocarbons 0 - 100% LEL/ ± 5% of reading or
Oxygen (O 2 ) 0 - 40% volume ± 0.5% O 2 0 - 30% volume ± 2% of full scale*
Section E – Gas Handling Equipment
Carbon Monoxide 0 - 500 ppm ± 5% of reading or PID Sensors
(CO) ± 5 ppm CO* VOC 0 - 2,000 ppm –
Hydrogen Sulfide 0 - 100 ppm ± 5% of reading or 0 - 50 ppm –
(H 2 S) ± 2 ppm H 2 S* TC Sensors
Toxics Methane (CH 4 ) 0 - 100% volume ± 5% of reading or
Ammonia 0 - 75 ppm ± 10% of reading or ± 2% of full scale*
(NH 3 ) ± 5% of full scale* Hydrogen 0 - 10% volume ± 5% of reading or
Arsine 0 - 1.5 ppm ± 10% of reading or (H 2 ) 0 - 100% volume ± 2% of full scale*
(AsH 3 ) ± 5% of full scale* * Whichever is greater
Chlorine 0 - 3 ppm ± 10% of reading or
(Cl 2 ) ± 5% of full scale*
Hydrogen Cyanide 0 - 15 ppm ± 10% of reading or
(HCN) ± 5% of full scale* i
Phosphine 0 - 1 ppm ± 10% of reading or The EAGLE 2 can be configured
(PH 3 ) ± 5% of full scale* with up to 6 gas sensors from
Sulfur Dioxide 0 - 6 ppm ± 10% of reading or
(SO 2 ) ± 5% of full scale* this list.
* Whichever is greater

E•404 1-877-PRAXAIR www.praxairdirect.com