Page 56 - Praxair Safety Products Guide

FACESHIELDS North ®

Headgear with 3” Crown Headgear with 7” Crown

3” crown protector, ratchet, lightweight, provides general Ratchet. Broader, deeper 7” crown
face protection for light-duty applications. Easily fits over protector provides an extra margin of
required spectacles, leaving room for air circulation to protection when harsh working conditions
prevent fogging. Accommodates standard size 112” x 8” require it. Features the exclusive Channel
visor. Visor sold separately. Grip system that mounts wide, wraparound

Part Number visors and locks them into place to form a perfect seal from
NREF300 dust, dirt and debris. Visor sold separately.
Headgear with 4” Crown Part Number
NREF500
4” crown protector, ratchet, accommodates wide-vision
(17” x 8”) wraparound visor which provides 40% more
protective area than standard size visor. Fits easily over NRE4002
required spectacles or respirators. Visor sold separately. NREFM4001
Part Number
NREF400 NRE4000
QUICK-LOK Cap Adapter
®
Headgear with Provides more permanent mounting of welding helmets or
Speedy Mounting Loops faceshields for longer-term or higher-activity applications.
®
The mounting base (4002) uses two screws through the hard
High Performance, ratchet suspension, for use with cap to act as a sturdy base. The second piece (FM4001)
slotted/non-slotted protective caps. snap fits over the base and includes the pivot point for that

Part Number Description attachment.
NREF5400 4” crown Part Number Description
NREF5500 7” crown NRE4000 Complete adapter kit
NREFM4001 Adapter
Headgear with QUICK-LOK NRE4002 Mounting base
Mounting Cups
TM
High performance for use with protective caps. Speedy-Loop
Part Number Description Mounting System
NREF4400 4” crown Provides easy on/off welding helmet or visor
NREF4500 7” crown mounting on protective caps and is fully adjustable.
Part Number
NRE5000
Mounting Bracket for Visor
Lightweight, dielectric mounting bracket Web Suspension Headgear
mounts on the front peak of cap. with Ratchet Headband
Dual-channel mounting system uses one
channel to anchor the bracket to the cap while the other SUPEREIGHT suspension’s eight load bearing points
channel holds the window so it can lock into the work balance and stabilize the cap’s weight and spreads it over
position and pivot up and out of the way when not needed. the widest possible area for maximum comfort. When
The locked channels form a positive seal to keep debris impacted, the force is broken down into smaller increments
from filtering between the cap and faceshield. Molded from for each load bearing point while spreading it over as
strong, heat resistant Noryl, it is ideal for extended outdoor large an area as possible. Strip-proof, crack-proof ratchet
use. Cap and faceshield not included. adjustable headband. Use with caps and full brim hats.
Part Number Part Number
NREFM70 NRE3RW2

A52

A Head_production10.indd 52 12/21/11 5:11 PM