Page 57 - Praxair Safety Products Guide

HARD HATS ProStar /3M ®
®

Caps Applications and Safety
Read this section completely before with an enormous performance they are designed to meet. All
selecting your protective caps. expectation, protection for your protective hard hats in accordance
Protective caps do not provide brain – your life! with this standard shall meet either
unlimited head protection. Types and Classes Standards Type I or Type II impact requirements.
A hard hat is the most unappreciated Protective hard hats are classified In addition, all hard hats are further
piece of protection on any job site, according to the specific impact and classified as meeting Class C, Class G,
when it should be the most trusted. electrical performance requirements or Class E electrical requirements.
It is an amazing piece of equipment FACE PROTECTION EYE, HEAD,
IMPACT TYPES
Type I: Hard hats intended to reduce the force of impact resulting from a blow only to the top of the head. Type II: Hard hats intended to reduce the force of
impact resulting from a blow which may receive limited protection off center, lateral or to the top of the head.
ELECTRICAL CLASSES
Class C (Conductive): Class C hard hats are not intended to provide protection against contact with electrical conductors.
Class G (General): Class G hard hats are intended to reduce the danger of contact exposure to low voltage conductors. Test samples are proof-tested at
2200 volts (phase to ground). However, this voltage is not intended as an indication of the voltage at which the hard hat protects the wearer.
Class E (Electrical): Class E hard hats are intended to reduce the danger of exposure to higher voltage conductors. Test samples are
proof-tested at 20,000 volts (phase to ground). However, this voltage is not intended as an indication of the voltage at which the hard hat protects the
wearer. Any hard hat meeting both Class C and Class G are considered to be Class E.

ProStar Bump Cap Realtree Hardwoods Orange County
TM
TM
Lightweight, cool, baseball style cap HD Camo Hard Hat Choppers Hard Hat
provides scalp covering to reduce High density hard hat with OCC
exposure to abrasions, bruises and Realtree hardwoods HDTM logo on front and back, made
lacerations due to minor bumps. camouflage pattern. Soft cushioned, in the USA. Carbon fiber look,
vented headband 4-point ratchet
These caps are non-ANSI compliant. 4-point ratchet suspension with
suspension. UV protective finish,
Part Number high density polyethylene shell. Meets lightweight FlexGear™. Cushioned
PRS65003 the requirements of ANSI Z89.1- brow and height adjustment. Meets
2003, Type 1, Class C, G and E. the requirements of ANSI Z89.1-
2003, Type 1, Class C, G and E.
Part Number
AEA46146 Part Number Description
AEA46140 HH140, black

Harley-Davidson Safety Caps
®
Racing Safety Cap
Harley-Davidson safety caps not only provide top of the line safety HDHHAT20
Flames Safety
protection, they also give you the opportunity to show off your personality Cap HDHHAT10
while you’re at work. The scorching, realistic flame and racing designs
incorporate the distinctive, recognizable Harley-Davidson Bar and Shield
logo on a high-gloss, sleek hard hat.

Part Number Description
WISHDHHAT10 Flames safety cap
WISHDHHAT20 Racing safety cap
©2010 H-D, All Rights Reserved. Manufactured by Sperian Protection under license from Harley-Davidson Motor Company.
WARNING: Not intended for use when riding a motorcycle. Improper use of this product may result in serious personal injury or death.

A53

A Head_production10.indd 53 12/21/11 5:11 PM